Non Sparking Slogging Ring Spanner

Non Sparking Slogging Ring Spanner

Die forged

  • These Spanners are used for tightening and loosening nuts in production or general service work
  • These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
  • Select the tool size that fits the workpiece securely.

GET THE QUOTE


 

P/N S mm L mm
SPZ-17 17 145
SPZ-19 19 145
SPZ-22 22 155
SPZ-24 24 165
SPZ-27 27 175
SPZ-30 30 185
SPZ-32 32 185
SPZ-34 34 200
SPZ-36 36 205
SPZ-38 38 215
SPZ-41 41 225
SPZ-46 46 235
SPZ-50 50 250
SPZ-55 55 265
SPZ-60 60 274
SPZ-65 65 298
SPZ-70 70 320
SPZ-75 75 326
SPZ-80 80 350
SPZ-85 85 355
SPZ-90 90 380
SPZ-95 95 390
SPZ-100 100 410

 

 

P/N S in L mm
SPA-1002 11/16″ 145
SPA-1004 3/4″ 145
SPA-1006 7/8″ 155
SPA-1008 1″ 175
SPA-1010 1-1/16″ 175
SPA-1012 1-1/8″ 185
SPA-1014 1-3/16″ 185
SPA-1016 1-1/4″ 185
SPA-1018 1-3/8″ 200
SPA-1020 1-1/2″ 215
SPA-1022 1-5/8″ 225
SPA-1024 1-3/4″ 235
SPA-1026 1-13/16″ 235
SPA-1028 2″ 250
SPA-1030 2-1/16″
SPA-1032 2-3/16″
SPA-1034 2-13/64″
SPA-1036 2-5/16″
SPA-1038 2-3/8″
SPA-1040 2-1/2″
SPA-1042 2-9/16″
SPA-1044 2-5/8″
SPA-1046 2-3/4″
SPA-1048 2-15/16″
SPA-1050 3″
SPA-1052 3-1/16″
SPA-1054 3-1/8″
SPA-1056 3-3/8″
SPA-1058 3-9/16″
SPA-1060 3-3/4″
SPA-1062 3-15/16″
SPA-1064 4-1/8″

 

 

 

 

 

PROPER USE

  • These Spanners are used for tightening and loosening nuts in production or general service work
  • These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
  • Select the tool size that fits the workpiece securely.

ABUSE/MISUSE

  • Do not use this tool to open “Stubborn/Frozen” nuts or bolts.
  • Never use an extension on the spanner handle. It will break the tool and can cause injury to the operator
  • Never strike this Spanner with a hammer or any other tool
  • Never Cock or Tilt and Open-Ended Spanner. The nut should be fully seated
  • Do not apply load more than the designated torque

Looking for the right tool for your industry?