The HX4 open frame series of crimping tool features a system of interchangeable dies which eliminate the need for separate fixed die crimp tools for each and every different application. The crimping dies snap into the tool frame and are retained in place by internal spring clips. The tool frames are equipped with a positive ratchet assembly that controls complete handle movement in both directions. Dies are available in a variety of combinations having single & double cavity design. These dies accommodate most coaxial and biaxial connectors and contacts conforming to MIL-C-39012, MIL-C- 39029 and numerous proprietary configurations.
| Model | C501 |
| Wire Sizes (mm2/AWG) | 3.33mm2-0.128mm2 |
| 12 AWG – 26 AWG | |
| MIL Std | M22520/5-01 |
| Length | 270mm |
| Weight | 680g |
Variants
Various Die Sets are available for the above tool. MIL P/N, DMC P/N and their dimensions are mentioned as per below:
| DMC PN | MIL PN | A Hex | A Length | B Hex | B Length |
| Y200P | M22520/5-02 | 0.091 | 0.09 | 0.068 | 0.27 |
| Y196 | M22520/5-03 | 0.128 | 0.325 | 0.105 | 0.325 |
| Y152 | M22520/5-04 | 0.138 | 0.09 | 0.118 | 0.27 |
| Y197 | M22520/5-05 | 0.213 | 0.325 | 0.178 | 0.325 |
| Y203 | M22520/5-06 | 0.128 | 0.094 | ||
| Y195 | M22520/5-07 | 0.255 | 0.325 | ||
| Y215 | M22520/5-08 | 0.128 | 0.375 | ||
| Y204P | M22520/5-09 | 0.178 | 0.4 | 0.068 | 0.093 |
| Y189 | M22520/5-10 | 0.16 | 0.4 | ||
| Y205P | M22520/5-11 | 213 | 0.4 | 0.068 | 0.093 |
| Y206P | M22520/5-13 | 0.255 | 0.4 | 0.068 | 0.093 |
| Y207P | M22520/5-15 | 263 | 0.4 | 0.068 | 0.093 |
| Y193 | M22520/5-17 | 0.118 | 0.375 | ||
| Y142 | M22520/5-19 | 0.255 | 0.4 | 0.213 | 0.4 |
| Y149 | M22520/5-21 | 0.475 | 0.4 | ||
| Y145 | M22520/5-23 | 0.284 | 0.4 | ||
| Y110P | M22520/5-25 | 0.429 | 0.4 | 0.1 | 0.12 |
| Y151 | M22520/5-27 | 0.532 | 0.4 | ||
| Y109P | M22520/5-29 | 0.324 | 0.4 | 0.1 | 0.12 |
| Y150 | M22520/5-31 | 0.501 | 0.4 | ||
| Y136 | M22520/5-33 | 0.343 | 0.4 | 0.105 | 0.4 |
| Y137 | M22520/5-35 | 0.324 | 0.4 | 0.128 | 0.4 |
| Y138 | M22520/5-37 | 0.314 | 0.4 | 0.151 | 0.4 |
| Y139 | M22520/5-39 | 0.209 | 0.4 | 0.16 | 0.4 |
| Y140 | M22520/5-41 | 0.29 | 0.4 | 0.178 | 0.4 |
| Y141 | M22520/5-43 | 0.268 | 0.4 | 0.197 | 0.4 |
| Y143 | M22520/5-45 | 0.231 | 0.4 | 218 | 0.4 |
| Y144 | M22520/5-47 | 0.359 | 0.4 | ||
| Y146 | M22520/5-49 | 0.401 | 0.4 | ||
| Y147 | M22520/5-51 | 0.431 | 0.4 | ||
| Y148 | M22520/5-53 | 0.454 | 0.4 | ||
| Y102 | M22520/5-55 | 0.324 | 0.4 | ||
| Y209P | M22520/5-57 | 0.213 | 0.4 | 0.1 | 0.12 |
| Y208P | M22520/5-59 | 0.255 | 0.4 | 0.1 | 0.12 |
| Y178 | M22520/5-61 | 0.429 | 0.4 | ||
| Y314P | M22520/5-63 | 0.263 | 0.4 | 0.091 | 0.09 |
