Non-Sparking AlBr Slogging Ring Spanner 17mm
₹ 1,653.60 + 18% GST
-
non-sparking-albr-slogging-ring-spanner-17mm-spz-17a
Die forged
- These Spanners are used for tightening and loosening nuts in production or general service work
- These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
- Select the tool size that fits the workpiece securely.
| P/N | S mm | L mm |
| SPZ-17 | 17 | 145 |
| SPZ-19 | 19 | 145 |
| SPZ-22 | 22 | 155 |
| SPZ-24 | 24 | 165 |
| SPZ-27 | 27 | 175 |
| SPZ-30 | 30 | 185 |
| SPZ-32 | 32 | 185 |
| SPZ-34 | 34 | 200 |
| SPZ-36 | 36 | 205 |
| SPZ-38 | 38 | 215 |
| SPZ-41 | 41 | 225 |
| SPZ-46 | 46 | 235 |
| SPZ-50 | 50 | 250 |
| SPZ-55 | 55 | 265 |
| SPZ-60 | 60 | 274 |
| SPZ-65 | 65 | 298 |
| SPZ-70 | 70 | 320 |
| SPZ-75 | 75 | 326 |
| SPZ-80 | 80 | 350 |
| SPZ-85 | 85 | 355 |
| SPZ-90 | 90 | 380 |
| SPZ-95 | 95 | 390 |
| SPZ-100 | 100 | 410 |
| P/N | S in | L mm |
| SPA-1002 | 11/16″ | 145 |
| SPA-1004 | 3/4″ | 145 |
| SPA-1006 | 7/8″ | 155 |
| SPA-1008 | 1″ | 175 |
| SPA-1010 | 1-1/16″ | 175 |
| SPA-1012 | 1-1/8″ | 185 |
| SPA-1014 | 1-3/16″ | 185 |
| SPA-1016 | 1-1/4″ | 185 |
| SPA-1018 | 1-3/8″ | 200 |
| SPA-1020 | 1-1/2″ | 215 |
| SPA-1022 | 1-5/8″ | 225 |
| SPA-1024 | 1-3/4″ | 235 |
| SPA-1026 | 1-13/16″ | 235 |
| SPA-1028 | 2″ | 250 |
| SPA-1030 | 2-1/16″ | – |
| SPA-1032 | 2-3/16″ | – |
| SPA-1034 | 2-13/64″ | – |
| SPA-1036 | 2-5/16″ | – |
| SPA-1038 | 2-3/8″ | – |
| SPA-1040 | 2-1/2″ | – |
| SPA-1042 | 2-9/16″ | – |
| SPA-1044 | 2-5/8″ | – |
| SPA-1046 | 2-3/4″ | – |
| SPA-1048 | 2-15/16″ | – |
| SPA-1050 | 3″ | – |
| SPA-1052 | 3-1/16″ | – |
| SPA-1054 | 3-1/8″ | – |
| SPA-1056 | 3-3/8″ | – |
| SPA-1058 | 3-9/16″ | – |
| SPA-1060 | 3-3/4″ | – |
| SPA-1062 | 3-15/16″ | – |
| SPA-1064 | 4-1/8″ | – |
PROPER USE
- These Spanners are used for tightening and loosening nuts in production or general service work
- These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
- Select the tool size that fits the workpiece securely.
ABUSE/MISUSE
- Do not use this tool to open “Stubborn/Frozen” nuts or bolts.
- Never use an extension on the spanner handle. It will break the tool and can cause injury to the operator
- Never strike this Spanner with a hammer or any other tool
- Never Cock or Tilt and Open-Ended Spanner. The nut should be fully seated
- Do not apply load more than the designated torque
Non-sparking slogging spanners feature reinforced striking surfaces allowing hammer blows to free frozen fasteners. The robust construction withstands impact forces that would damage standard spanners.
Ring end non-sparking slogging spanners provide full contact around fastener heads for maximum force transfer, while open-end versions allow access where ring spanners cannot fit due to space constraints.
Ring end non-sparking slogging spanners provide full contact around fastener heads for maximum force transfer, while open-end versions allow access where ring spanners cannot fit due to space constraints.
Outdoor equipment exposure, corroded fasteners in marine environments, aged equipment in refineries, and frozen bolts in mining machinery all require the additional force that non-sparking slogging spanners provide.
Outdoor equipment exposure, corroded fasteners in marine environments, aged equipment in refineries, and frozen bolts in mining machinery all require the additional force that non-sparking slogging spanners provide.
Guest May 15, 2025
Smooth finish and safe material.
Guest August 07, 2025
Recommended for hazardous area maintenance.
Guest March 12, 2024
Non sparking tool suitable for critical operations.