Non-Sparking AlBr Slogging Ring Spanner 7/8 Inch
-
non-sparking-albr-slogging-ring-spanner-7-8-inch-spa-1006a
Die forged
- These Spanners are used for tightening and loosening nuts in production or general service work
- These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
- Select the tool size that fits the workpiece securely.
P/N | S mm | L mm |
SPZ-17 | 17 | 145 |
SPZ-19 | 19 | 145 |
SPZ-22 | 22 | 155 |
SPZ-24 | 24 | 165 |
SPZ-27 | 27 | 175 |
SPZ-30 | 30 | 185 |
SPZ-32 | 32 | 185 |
SPZ-34 | 34 | 200 |
SPZ-36 | 36 | 205 |
SPZ-38 | 38 | 215 |
SPZ-41 | 41 | 225 |
SPZ-46 | 46 | 235 |
SPZ-50 | 50 | 250 |
SPZ-55 | 55 | 265 |
SPZ-60 | 60 | 274 |
SPZ-65 | 65 | 298 |
SPZ-70 | 70 | 320 |
SPZ-75 | 75 | 326 |
SPZ-80 | 80 | 350 |
SPZ-85 | 85 | 355 |
SPZ-90 | 90 | 380 |
SPZ-95 | 95 | 390 |
SPZ-100 | 100 | 410 |
P/N | S in | L mm |
SPA-1002 | 11/16″ | 145 |
SPA-1004 | 3/4″ | 145 |
SPA-1006 | 7/8″ | 155 |
SPA-1008 | 1″ | 175 |
SPA-1010 | 1-1/16″ | 175 |
SPA-1012 | 1-1/8″ | 185 |
SPA-1014 | 1-3/16″ | 185 |
SPA-1016 | 1-1/4″ | 185 |
SPA-1018 | 1-3/8″ | 200 |
SPA-1020 | 1-1/2″ | 215 |
SPA-1022 | 1-5/8″ | 225 |
SPA-1024 | 1-3/4″ | 235 |
SPA-1026 | 1-13/16″ | 235 |
SPA-1028 | 2″ | 250 |
SPA-1030 | 2-1/16″ | – |
SPA-1032 | 2-3/16″ | – |
SPA-1034 | 2-13/64″ | – |
SPA-1036 | 2-5/16″ | – |
SPA-1038 | 2-3/8″ | – |
SPA-1040 | 2-1/2″ | – |
SPA-1042 | 2-9/16″ | – |
SPA-1044 | 2-5/8″ | – |
SPA-1046 | 2-3/4″ | – |
SPA-1048 | 2-15/16″ | – |
SPA-1050 | 3″ | – |
SPA-1052 | 3-1/16″ | – |
SPA-1054 | 3-1/8″ | – |
SPA-1056 | 3-3/8″ | – |
SPA-1058 | 3-9/16″ | – |
SPA-1060 | 3-3/4″ | – |
SPA-1062 | 3-15/16″ | – |
SPA-1064 | 4-1/8″ | – |
PROPER USE
- These Spanners are used for tightening and loosening nuts in production or general service work
- These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
- Select the tool size that fits the workpiece securely.
ABUSE/MISUSE
- Do not use this tool to open “Stubborn/Frozen” nuts or bolts.
- Never use an extension on the spanner handle. It will break the tool and can cause injury to the operator
- Never strike this Spanner with a hammer or any other tool
- Never Cock or Tilt and Open-Ended Spanner. The nut should be fully seated
- Do not apply load more than the designated torque