Non-Sparking BeCu Double Ended Ring Spanner 6*7
₹ 1,042.35
₹ 1,359.00
-
non-sparking-becu-double-ended-ring-spanner-6-7-soa-0607b
Die forged
- Box wrenches in the regular pattern are designed for general service.
- Use box or socket wrenches whenever possible in place of open-ended wrenches
- Select the tool size that fits the workpiece securely.
P/N | S1*S2 mm | L mm |
SOA-0607 | 6*7 | 115 |
SOA-0809 | 8*9 | 130 |
SOA-1011 | 10*11 | 140 |
SOA-1213 | 12*13 | 160 |
SOA-1415 | 14*15 | 220 |
SOA-1617 | 16*17 | 220 |
SOA-1819 | 18*19 | 250 |
SOA-2123 | 21*23 | 285 |
SOA-2427 | 24*27 | 340 |
SOA-2528 | 25*28 | 350 |
SOA-3032 | 30*32 | 380 |
SOA-3236 | 32*36 | 405 |
SOA-3436 | 34*36 | 420 |
SOA-3641 | 36*41 | 445 |
SOA-4146 | 41*46 | 470 |
SOA-4650 | 46*50 | 490 |
SOA-5055 | 50*55 | 510 |
SOA-1258 | 1/2″BS*5/8″BS | 480 |
(7/16WW*9/16WW) |
P/N | S1*S2 in | L mm |
SOC-1002 | 1/4″*5/16″ | 115 |
SOC-1004 | 5/16″*3/8″ | 125 |
SOC-1006 | 3/8″*7/16″ | 140 |
SOC-1008 | 7/16″*1/2″ | 155 |
SOC-1010 | 1/2″*9/16″ | 175 |
SOC-1012 | 9/16″*5/8″ | 215 |
SOC-1014 | 5/8″*11/16″ | 220 |
SOC-1016 | 11/16″*3/4″ | 245 |
SOC-1018 | 3/4″*13/16″ | 255 |
SOC-1020 | 13/16″*7/8″ | 275 |
SOC-1022 | 7/8″*15/16″ | 305 |
SOC-1024 | 15/16″*1″ | 310 |
SOC-1026 | 1″*1-1/16″ | 330 |
SOC-1028 | 1-1/16″*1-1/8″ | 330 |
SOC-1030 | 1-1/8″*1-3/16″ | 370 |
SOC-1032 | 1-3/16″*1-1/4″ | 370 |
SOC-1034 | 1-1/4″*1-5/16″ | 380 |
SOC-1036 | 1-5/16″*1-3/8″ | 410 |
SOC-1038 | 1-3/8″*1-7/16″ | 410 |
SOC-1040 | 1-7/16″*1-5/8″ | 450 |
SOC-1042 | 1-1/2″*1-9/16″ | 460 |
SOC-1044 | 1-5/8″*1-13/16″ | 470 |
SOC-1046 | 1-13/16″*2″ | 490 |
SOC-1048 | 2″*2-3/16″ | 510 |
SOC-1050 | 2″*2-3/8″ | 520 |
SOC-1052 | 2-3/16″*2-3/8″ | 530 |
SOC-1054 | 2-3/8″*2-3/4″ | 560 |
PROPER USE
- Box wrenches in the regular pattern are designed for general service.
- Use box or socket wrenches whenever possible in place of open-ended wrenches
- Select the tool size that fits the workpiece securely.
ABUSE/MISUSE
- Do not use this tool to open “Stubborn/Frozeenutsor bolts.
- Never use an extension on the spanner handle. It will break the tool and can cause injury to the operator.
- Never strike this Spanner with a hammer or any other tool.
- Do not apply load more than the designated torque.