Non-Sparking BeCu Slogging Open Spanner 3/4 Inch
-
non-sparking-becu-slogging-open-spanner-3-4-inch-sna-1002b
Die forged
- These Spanners are used for tightening and loosening nuts in production or general service work
- These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
- Select the tool size that fits the workpiece securely.
| P/N | S in | L mm |
| SNA-1002 | 3/4″ | 125 |
| SNA-1004 | 7/8″ | 135 |
| SNA-1006 | 15/16″ | 150 |
| SNA-1008 | 1″ | 175 |
| SNA-1010 | 1-1/8″ | 190 |
| SNA-1012 | 1-1/4″ | 190 |
| SNA-1014 | 1-7/16″ | 210 |
| SNA-1016 | 1-1/2″ | 220 |
| SNA-1018 | 1-5/8″ | 230 |
| SNA-1020 | 1-3/4″ | 250 |
| SNA-1022 | 1-7/8″ | 250 |
| SNA-1024 | 2″ | 275 |
| SNA-1028 | 2-1/8″ | 305 |
| SNA-1030 | 2-1/4″ | 315 |
| SNA-1032 | 2-3/8″ | 315 |
| SNA-1034 | 2-1/2″ | 335 |
| SNA-1036 | 2-3/4″ | 370 |
| SNA-1038 | 3″ | 375 |
| SNA-1040 | 3-1/8″ | 400 |
| SNA-1042 | 3-1/2″ | 445 |
| SNA-1044 | 3-3/4″ | 445 |
| SNA-1046 | 4″ | 485 |
| P/N | S mm | L mm |
| SNA-17 | 17 | 125 |
| SNA-19 | 19 | 125 |
| SNA-22 | 22 | 135 |
| SNA-24 | 24 | 150 |
| SNA-27 | 27 | 175 |
| SNA-30 | 30 | 190 |
| SNA-32 | 32 | 190 |
| SNA-34 | 34 | 190 |
| SNA-36 | 36 | 210 |
| SNA-38 | 38 | 210 |
| SNA-41 | 41 | 230 |
| SNA-46 | 46 | 250 |
| SNA-50 | 50 | 275 |
| SNA-55 | 55 | 305 |
| SNA-60 | 60 | 315 |
| SNA-65 | 65 | 335 |
| SNA-70 | 70 | 370 |
| SNA-75 | 75 | 375 |
| SNA-80 | 80 | 400 |
| SNA-85 | 85 | 400 |
| SNA-90 | 90 | 445 |
| SNA-95 | 95 | 445 |
| SNA-100 | 100 | 485 |
PROPER USE
- These Spanners are used for tightening and loosening nuts in production or general service work
- These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
- Select the tool size that fits the workpiece securely.
ABUSE/MISUSE
- Do not use this tool to open “Stubborn/Frozen” nuts or bolts.
- Never use an extension on the spanner handle. It will break the tool and can cause injury to the operator
- Never strike this Spanner with a hammer or any other tool
- Never Cock or Tilt and Open-Ended Spanner. The nut should be fully seated
- Do not apply load more than the designated torque
More Products From This Category
More Products
.png "Non-Sparking AlBr Valve Wrench (Plug Valves) DN15")
Non-Sparking AlBr Bung Wrench 300mm
₹ 5,564.00
Non-Sparking AlBr Combination Spanner 6mm
₹ 1,175.00
Non-Sparking AlBr Slogging Ring Spanner 17mm
₹ 2,212.00