Non-Sparking BeCu Slogging Open Spanner 38mm
₹ 10,318.00
-
non-sparking-becu-slogging-open-spanner-38mm-sna-38b
Die forged
- These Spanners are used for tightening and loosening nuts in production or general service work
- These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
- Select the tool size that fits the workpiece securely.
| P/N | S1*S2 mm | L mm |
| SNF-0607 | 6*7 | 92 |
| SNF-0809 | 8*9 | 100 |
| SNF-1011 | 10*11 | 115 |
| SNF-1213 | 12*13 | 128 |
| SNF-1415 | 14*15 | 143 |
| SNF-1617 | 16*17 | 157 |
| SNF-1819 | 18*19 | 179 |
| SNF-2022 | 20*22 | 195 |
| SNF-2123 | 21*23 | 200 |
| SNF-2426 | 24*26 | 220 |
| SNF-2427 | 24*27 | 230 |
| SNF-2528 | 25*28 | 236 |
| SNF-3032 | 30*32 | 265 |
| SNF-3236 | 32*36 | 300 |
| SNF-3436 | 34*36 | 300 |
| SNF-3638 | 36*38 | 330 |
| SNF-3641 | 36*41 | 330 |
| SNF-4146 | 41*46 | 360 |
| SNF-4650 | 46*50 | 370 |
| SNF-5055 | 50*55 | 385 |
| SNF-1258 | 1/2″BS*5/8″BS | 300 |
| (7/16WW*9/16WW) |
| P/N | S1*S2 in | L mm |
| SNG-1002 | 1/4″*5/16″ | 90 |
| SNG-1004 | 5/16″*3/8″ | 100 |
| SNG-1006 | 3/8″*7/16″ | 110 |
| SNG-1008 | 3/8″*1/2″ | 115 |
| SNG-1010 | 7/16″*1/2″ | 120 |
| SNG-1012 | 1/2″*9/16″ | 130 |
| SNG-1014 | 9/16″*5/8″ | 150 |
| SNG-1016 | 5/8″*11/16″ | 160 |
| SNG-1018 | 5/8″*3/4″ | 165 |
| SNG-1020 | 11/16″*3/4″ | 170 |
| SNG-1022 | 3/4″*13/16″ | 180 |
| SNG-1024 | 3/4″*7/8″ | 185 |
| SNG-1026 | 13/16″*7/8″ | 190 |
| SNG-1028 | 7/8″*15/16″ | 210 |
| SNG-1030 | 15/16″*1″ | 220 |
| SNG-1032 | 1″*1-1/16″ | 230 |
| SNG-1034 | 1-1/16″*1-1/8″ | 235 |
| SNG-1036 | 1-1/8″*1-3/16″ | 245 |
| SNG-1038 | 1-3/16″*1-1/4″ | 250 |
| SNG-1040 | 1-1/4″*1-5/16″ | _ |
| SNG-1042 | 1-5/16″*1-3/8″ | _ |
| SNG-1044 | 1-3/8″*1-7/16″ | _ |
| SNG-1046 | 1-7/16″*1-5/8″ | _ |
| SNG-1048 | 1-1/2″*1-9/16″ | _ |
| SNG-1050 | 1-5/8″*1-13/16″ | _ |
| SNG-1052 | 1-13/16″*2″ | _ |
| SNG-1054 | 2″*2-3/16″ | _ |
| SNG-1056 | 2″*2-3/8″ | _ |
| SNG-1058 | 2-3/16″*2-3/8″ | _ |
| SNG-1060 | 2-3/8″*2-9/16″ | _ |
PROPER USE
- These Spanners are used for tightening and loosening nuts in production or general service work
- These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
- Select the tool size that fits the workpiece securely.
ABUSE/MISUSE
- Do not use this tool to open “Stubborn/Frozen” nuts or bolts.
- Never use an extension on the spanner handle. It will break the tool and can cause injury to the operator
- Never strike this Spanner with a hammer or any other tool
- Never Cock or Tilt and Open-Ended Spanner. The nut should be fully seated
- Do not apply load more than the designated torque
More Products From This Category
More Products
.png "Non-Sparking AlBr Valve Wrench (Plug Valves) DN15")
Non-Sparking AlBr Bung Wrench 300mm
₹ 5,564.00
Non-Sparking AlBr Combination Spanner 6mm
₹ 1,175.00
Non-Sparking AlBr Slogging Ring Spanner 17mm
₹ 2,212.00