Non-Sparking Circular Bung Wrench SQI-1002
-
non-sparking-circular-bung-wrench-sqi-1002-bung-sqi-1002
Non-Sparking Circular Bung Wrench
Our Non-Sparking Circular Bung Wrench is the best alternative to regular tools and finds application in potentially explosive environments.
Non-Sparking Tools are mandatory in any environment where an ignition source can result in a fire or explosion.
Our tools are tested and comply with IS 4595 standard for non-sparking properties.
- When using a heavy-duty Pipe Wrench, maintain a gap between the back of the hook jaw and the pipe.
- This concentrates the pressure at the jaw teeth only and produces the maximum gripping force and aids ratcheting action.
- If possible, always pull rather than push on the pipe wrench handle and maintain a proper stance with feet firm to hold the balance.
- Inspect Pipe Wrenches periodically for worn or unsafe parts and replace them.
P/N | L mm | H1 mm | H2 mm |
SQI-1002 | 385 | 93 | 61 |
Mechanical Properties
We offer 2 kinds of materials for non-sparking tools,
Copper-Beryllium alloy (Be-Cu) and Aluminium-Bronze (Al-Br) alloy:
COPPER-BERYLLIUM ALLOY | ALUMINIUM-BRONZE ALLOY | ||
Composition | Be: 1.8%-2% Ni+Co: 0.2%-1.2% Others: <0.5% Rest: Cu | Composition | Al: 10%-12% Ni: 4 % – 6 % Fe+Mn: <5.8 % Others: <0.5% Rest: Cu |
Hardness | 283-365 Brinell | Hardness | 229-291 Brinell |
Tensile Strength | ~1250 N/mm2 | Tensile Strength | ~800 N/mm2 |
PROPER USE
- When using a heavy-duty Pipe Wrench, maintain a gap between the back of the hook jaw and the pipe.
- This concentrates the pressure at the jaw teeth only and produces the maximum gripping force and aids ratcheting action.
- If possible, always pull rather than push on the pipe wrench handle and maintain a proper stance with feet firm to hold the balance.
- Inspect Pipe Wrenches periodically for worn or unsafe parts and replace them.
ABUSE/MISUSE
- Do not use a Pipe Wrench as a hammer, nor strike a Pipe Wrench with a hammer
- Pipe Wrenches are designed to turn or hold pipe; never use a Pipe Wrench to bend, raise, or left a pipe.
- Never use a pipe extender or leverage
- Do not permit chips to clog flutes as this will prevent the tap from turning.