Non-Sparking Circular Bung Wrench SQI-1002
₹ 6,043.96 (Incl. of all taxes)
₹ 5,122.00 + 18% GST
₹ 7,880.00
₹ 5,122.00 + 18% GST
-
non-sparking-circular-bung-wrench-sqi-1002-sqia-1002a
Non-Sparking Circular Bung Wrench
Our Non-Sparking Circular Bung Wrench is the best alternative to regular tools and finds application in potentially explosive environments.
Non-Sparking Tools are mandatory in any environment where an ignition source can result in a fire or explosion.
Our tools are tested and comply with IS 4595 standard for non-sparking properties.
- When using a heavy-duty Pipe Wrench, maintain a gap between the back of the hook jaw and the pipe.
- This concentrates the pressure at the jaw teeth only and produces the maximum gripping force and aids ratcheting action.
- If possible, always pull rather than push on the pipe wrench handle and maintain a proper stance with feet firm to hold the balance.
- Inspect Pipe Wrenches periodically for worn or unsafe parts and replace them.
| P/N | L mm | s1 mm | s2 mm |
| SQIA-1002A | 300 | 38 | 52 |
Mechanical Properties
We offer 2 kinds of materials for non-sparking tools,
Copper-Beryllium alloy (Be-Cu) and Aluminium-Bronze (Al-Br) alloy:
| COPPER-BERYLLIUM ALLOY | ALUMINIUM-BRONZE ALLOY | ||
| Composition | Be: 1.8%-2% Ni+Co: 0.2%-1.2% Others: <0.5% Rest: Cu | Composition | Al: 10%-12% Ni: 4 % – 6 % Fe+Mn: <5.8 % Others: <0.5% Rest: Cu |
| Hardness | 283-365 Brinell | Hardness | 229-291 Brinell |
| Tensile Strength | ~1250 N/mm2 | Tensile Strength | ~800 N/mm2 |
PROPER USE
- When using a heavy-duty Pipe Wrench, maintain a gap between the back of the hook jaw and the pipe.
- This concentrates the pressure at the jaw teeth only and produces the maximum gripping force and aids ratcheting action.
- If possible, always pull rather than push on the pipe wrench handle and maintain a proper stance with feet firm to hold the balance.
- Inspect Pipe Wrenches periodically for worn or unsafe parts and replace them.
ABUSE/MISUSE
- Do not use a Pipe Wrench as a hammer, nor strike a Pipe Wrench with a hammer
- Pipe Wrenches are designed to turn or hold pipe; never use a Pipe Wrench to bend, raise, or left a pipe.
- Never use a pipe extender or leverage
- Do not permit chips to clog flutes as this will prevent the tap from turning.
More Products From This Category
More Products
Non-Sparking AlBr Carbide Drum Opener 280mm
₹ 2,889.29
₹ 4,445.06
Non-Sparking Drum Opener Pin Type SQIX-1002A
₹ 4,823.66
₹ 7,421.02
Non-Sparking Drum Opener S Type SQIY-1002A
₹ 3,387.84
₹ 5,212.06
Guest April 26, 2024
Build quality is strong and suitable for industrial use.
Guest November 15, 2024
Tool performs well and meets our site safety standards.
Guest May 06, 2024
Tool meets safety compliance and performs well.