Non-Sparking BeCu Combination Spanner 17mm
₹ 4,480.00
-
non-sparking-becu-combination-spanner-17mm-sme-17b
Die forged
- These Spanners are used for tightening and loosening nuts in production or general service work
- These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
- Select the tool size that fits the workpiece securely.
P/N | S mm | L mm |
SME-6 | 6 | 105 |
SME-7 | 7 | 120 |
SME-8 | 8 | 120 |
SME-9 | 9 | 135 |
SME-10 | 10 | 135 |
SME-11 | 11 | 150 |
SME-12 | 12 | 150 |
SME-13 | 13 | 175 |
SME-14 | 14 | 175 |
SME-15 | 15 | 195 |
SME-16 | 16 | 195 |
SME-17 | 17 | 195 |
SME-18 | 18 | 215 |
SME-19 | 19 | 215 |
SME-20 | 20 | 230 |
SME-21 | 21 | 230 |
SME-22 | 22 | 245 |
SME-23 | 23 | 265 |
SME-24 | 24 | 265 |
SME-25 | 25 | 265 |
SME-26 | 26 | 290 |
SME-27 | 27 | 290 |
SME-30 | 30 | 320 |
SME-32 | 32 | 340 |
SME-34 | 34 | 360 |
SME-35 | 35 | 360 |
SME-36 | 36 | 360 |
P/N | S in | L mm |
SMEA-1002 | 1/4″ | 105 |
SMEA-1004 | 5/16″ | 120 |
SMEA-1006 | 3/8″ | 135 |
SMEA-1008 | 7/16″ | 150 |
SMEA-1010 | 1/2″ | 175 |
SMEA-1012 | 9/16″ | 175 |
SMEA-1014 | 19/32″ | 195 |
SMEA-1016 | 5/8″ | 195 |
SMEA-1018 | 11/16″ | 195 |
SMEA-1020 | 3/4″ | 215 |
SMEA-1022 | 13/16″ | 230 |
SMEA-1024 | 7/8″ | 245 |
SMEA-1026 | 15/16″ | 265 |
SMEA-1028 | 1″ | 290 |
SMEA-1030 | 1-1/16″ | 290 |
SMEA-1032 | 1-1/8″ | 320 |
SMEA-1034 | 1-3/16″ | 320 |
SMEA-1036 | 1-1/4″ | 340 |
SMEA-1038 | 1-5/16″ | 360 |
SMEA-1040 | 1-3/8″ | 360 |
PROPER USE
- These Spanners are used for tightening and loosening nuts in production or general service work
- These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
- Select the tool size that fits the workpiece securely.
ABUSE/MISUSE
- Do not use this tool to open “Stubborn/Frozen” nuts or bolts.
- Never use an extension on the spanner handle. It will break the tool and can cause injury to the operator
- Never strike this Spanner with a hammer or any other tool
- Never Cock or Tilt and Open-Ended Spanner. The nut should be fully seated
- Do not apply load more than the designated torque