Non-Sparking BeCu Double Ended Open Spanner 2-3/16 * 2-3/8

SKU: SNG-1058B

    non-sparking-becu-double-ended-open-spanner-2-3-16-2-3-8-sng-1058b

Die forged

  • These Spanners are used for tightening and loosening nuts in production or general service work
  • These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
  • Select the tool size that fits the workpiece securely.
P/NS1*S2 mmL mm
SNF-06076*792
SNF-08098*9100
SNF-101110*11115
SNF-121312*13128
SNF-141514*15143
SNF-161716*17157
SNF-181918*19179
SNF-202220*22195
SNF-212321*23200
SNF-242624*26220
SNF-242724*27230
SNF-252825*28236
SNF-303230*32265
SNF-323632*36300
SNF-343634*36300
SNF-363836*38330
SNF-364136*41330
SNF-414641*46360
SNF-465046*50370
SNF-505550*55385
SNF-12581/2″BS*5/8″BS300

 (7/16WW*9/16WW)

 

P/NS1*S2 inL mm
SNG-10021/4″*5/16″90
SNG-10045/16″*3/8″100
SNG-10063/8″*7/16″110
SNG-10083/8″*1/2″115
SNG-10107/16″*1/2″120
SNG-10121/2″*9/16″130
SNG-10149/16″*5/8″150
SNG-10165/8″*11/16″160
SNG-10185/8″*3/4″165
SNG-102011/16″*3/4″170
SNG-10223/4″*13/16″180
SNG-10243/4″*7/8″185
SNG-102613/16″*7/8″190
SNG-10287/8″*15/16″210
SNG-103015/16″*1″220
SNG-10321″*1-1/16″230
SNG-10341-1/16″*1-1/8″235
SNG-10361-1/8″*1-3/16″245
SNG-10381-3/16″*1-1/4″250
SNG-10401-1/4″*1-5/16″_
SNG-10421-5/16″*1-3/8″_
SNG-10441-3/8″*1-7/16″_
SNG-10461-7/16″*1-5/8″_
SNG-10481-1/2″*1-9/16″_
SNG-10501-5/8″*1-13/16″_
SNG-10521-13/16″*2″_
SNG-10542″*2-3/16″_
SNG-10562″*2-3/8″_
SNG-10582-3/16″*2-3/8″_
SNG-10602-3/8″*2-9/16″_

 

PROPER USE

  • These Spanners are used for tightening and loosening nuts in production or general service work
  • These Spanners are used when it is difficult to access a bolt/nut with a socket or a Ring Spanner
  • Select the tool size that fits the workpiece securely.

ABUSE/MISUSE

  • Do not use this tool to open “Stubborn/Frozen” nuts or bolts.
  • Never use an extension on the spanner handle. It will break the tool and can cause injury to the operator
  • Never strike this Spanner with a hammer or any other tool
  • Never Cock or Tilt and Open-Ended Spanner. The nut should be fully seated
  • Do not apply load more than the designated torque